Before & After Photos

This homeowner needed a new sump pump installed as part of a basement waterproofing system. Their old one was an open pit, that allowed odors and moisture to rise into the basement and be pulled up into the living space. 

Their new pump is a large basin that houses a 1/3hp pump covered with an air-tight lid. The system has a float on top allowing for water to enter if a leak occurs from above, and the basin is large enough that if the homeowner later feels a need to add a pump or battery backup system, they can do so without having to re-dig the hole or replace the basin. A clean pump stand keeps the sump out of any grime, grit, and sediment that may collect in the bottom of the basin to prevent clogs.

Water has been seeping through the porous block walls in the basement of this home. It has left behind bubbling paint and staining on the walls as well as a musty, damp environment. To control the water seeping into the basement, we've worked with the homeowner and determined a Waterproofing system with CleanSpace and DryTrak is the best solution. 

As part of the Waterproofing System, CleanSpace is attached to the basement walls. The heavy-duty vapor barrier will direct water that works its way through the cinderblock wall down into the drainage track and ultimately to the sump pump and away from the home. Clean Space is a great option because it's heavy-duty and allows the homeowner to frame and finish their basement over the system making the space useable, and adding valuable square footage to their home without the worry of damage to their property. 

As part of waterproofing their basement, this Richmond Homeowner needed to replace their old sump pump. We installed a SuperSump plus, which features an airtight lid with floor drain for leaks from above the system, a 1/3hp pump that sits on a clean pump stand to keep it out of any sediment that collects in the bottom of the basin, and a Water Watch alarm. 

The homeowner also opted to add an UltraSump Battery Backup to the system to ensure that in the event of a power outage, circuit failure, or pump failure, they would have a backup system to protect their basement. 

This homeowner had concerns about water entering their basement, especially during the heavy rainfall the Virginia Peninsula and Richmond have been seeing. The solution was to install a complete basement waterproofing system. CleanSpace was installed covering the below-grade portion of the basement walls to direct any water infiltration into the drainage system. The WaterGuard Drainage System was installed to collect any water entering the basement that was directed downward by the CleanSpace and direct it toward the SuperSump System. The SuperSump System is a 1/3 hp sump pump, that pumps water out of the basement and away from the home. In these photos, you can see the bottom of the stairs in the basement. The before photo shows staining on the walls and a collection of silt and sediment where the floor meets the wall. these are clear signs that water is entering the basement. Since the basement is used for storage and laundry this poses a threat to the homeowner's valuables and washer and dryer. In the after photo, you can see the dark line of cement around the perimeter of the basement where the WaterGuard system has been installed and the bright white walls that are lined with CleanSpace. 

Moisture finds its way through porous foundation walls. Common signs are chipping, peeling or bubbling paint, water staining, and efflorescence (a white powdery residue). 

As part of the waterproofing system installed in this basement, CleanSpace is installed on the walls to direct moisture that moves through the poured concrete walls down into the french drain system we installed called WaterGuard.