Before & After Photos

Homeowners in Hebron, Maryland were dealing with high humidity inside of their crawlspace. Usually, the relative humidity inside of a crawlspace should range in between 45%-60% in RH(relative humidity). This range determines if your crawlspace is too dry or has to much air moisture leading to sweaty, damp, and smelly insulation.

These homeowners called out Dr. Energy Saver to fix their issue. During the inspection of his crawlspace, we measured the RH at 73.5% which caused his crawlspace to become potentially an area for microbial growth. We resolved this issue before any damages were done by installing our SaniDry dehumidifier.

This will result in the humidity levels to drop and remain constant and a healthy, dry, and odorless crawlspace. These homeowners were thrilled at the results. 

Look at this drastic transformation! Amazing job by the Lawson Home Services team and a happy homeowner is what we strive for the most!

Blown In Fiberglass Insulation on the attic floor and SilverGlo™ Foam on the Attic Kneewall helps this Kent County homeowner save money on their utility bills while keeping the home comfortable year round.

Amazing dryer vent transformation!

Houston, DE - This homeowner had rooms that were hot in the summer and cold in the winter. The homeowner called Lawson Home Services to perform an Energy Audit to determine what options would be best in improve the efficiency of the home and make the rooms cooler in the summer and warmer in the winter. Before insulation was added the old dirty insulation was removed and the attic floor was properly air sealed to keep the air that they heat and cool in the home longer. After the air sealing was completed an insulated storage deck was built and the remaining attic was insulated to R60 using TruSoft Cellulose.