Before & After Photos

This Ithaca, NY customer had multiple leaking components on his boiler system. Halco service professional, Bret, replaced the automatic water feed valve, expansion tank, and air vent. 

After this Ithaca, NY customer had a couple radiators freeze and break over the winter, he contacted Halco for a no-cost heating estimate to replace the radiators and current system. We installed this Navien high efficiency boiler and moved the water heater to allow for room to install the Navien. We also removed the broken radiators and installed two new ones!    

Check out the new setup for this art studio at a local Ithaca, NY school! We installed a 24” stainless steel utility sink with a clay interceptor, as well as a new 48” stainless steel work table with sink to replace the existing storage shelf.

This Ithaca, NY customer had a Navien installed by another contractor that had insufficient piping which was very loud. It also functioned poorly and was not producing heat or hot water properly. Our tech reconfigured the entire system and it is now functioning as it should!

This customer contacted us with a no heat situation stating his furnace does not stay on long enough to maintain the desired temperature. Upon arrival, we took combustion readings and found CO over 2,000 ppm! We removed the intake and retook combustion readings and the CO dropped to 600 ppm. Our techs pulled the blower motor and found a bad secondary heat exchanger. The furnace was put back together and red-tagged, meaning the unit was shut down due to a critical safety problem.  We then sent a home energy advisor to follow up with the customer and he ultimately chose to replace his furnace. We were there just a few days later to get him back up and running, just in time for the cold weather to hit!