Before & After Photos

This homeowner from Worcester, MA called us about ice damming problems. They experienced costly fuel bills during the cold months of the year. After our evaluation and inspection, we found major heat loss due to inefficient insulation and air leaks.

To fix this common problem, we use our SuperPlatform treatment. First, we removed the existing insulation; remove all of the old insulation and properly dispose of the materials off site. In addition, this homeowner requested more storage space, so we accommodated and made a catwalk for easy access. We laid our 4" SilverGlo foam board across the wooded walkway. Next, we installed plywood over the foam board and secured it. Finally, we dense packed our TruSoft cellulose insulation to complete the project.

Thanks to Dr. Energy Saver by Eco Energy Solutions, this customer is happier in their warm and comfortable home - and no longer dealing with ice damming issues!

Spraying the heat ducts with spray foam

This homeowner in Millbury, MA called us out to their home to update their attic insulation. Due to having inefficient insulation they were experiencing snow melt on the roof! Some spots were too hot and others were too cold. This home was insulated with old fiberglass insulation, which does not stop airflow!

We know we needed to remove all of the old, inefficient fiberglass insulation in this knee wall space. We bag up and properly dispose of the materials and move on to installing our SilverGlo! We install our blocks of Silverglo foam insulation board between the ceiling joist bays, and under the rafters. Around the blocks are air sealed with foam. Now, inside air is not able to escape out of the home and outside air is not able to enter!

Thanks to Dr. Energy Saver by Eco Energy Solutions this home is more comfortable, energy-efficient, and no longer has snow melt!

Attic was insulated with SilverGlo foam board

This Lanesborough, MA homeowner reached out to Fogarty's Home Services to fix his wet basement. His home is over 200 years old and the sump system that was set-up was outdated and unreliable. Our Production Crew solved this problem by moving the sump pump to a better location in the basement. We installed a SuperSump® System with a sturdy liner, airtight lid, 1/3 hp cast iron pump which can discharge up to 2,200 gallons per hour, 8 feet high, and a stand to keep the pump out of silt and sediment. Our very happy customer now has a more reliable sump pump, less air leakage from the sump hole, a drier basement, less radon gas and odors, and a much safer and better looking installation! "We Fix Uncomfortable Homes!"