Before & After Photos

Click on a photo to enlarge.

Seal & Wrap Chimney With Open Air Space in Pittsfield, MA

This Pittsfield homeowner contacted Fogarty's Home Services because his home was experiencing excess moisture and drafts. When we completed our Free Home Energy Evaluation, we found that there was open air space around the chimney in the attic. The building code requires that no combustible materials, including wood framing and insulation, be within 2" of a masonry chimney. This has left millions of homes, just like this one, with an airspace from the basement or crawl space right to the attic. Air that homeowners paid to heat their homes is continually leaking out to the vented attic, where it is lost. This results in a more drafty, uncomfortable home that's harder to heat, with higher energy bills. To solve this problem for our homeowner, Fogarty's Home Services flashed the space between the wood framing and masonry with metal and then sealed it airtight with special high-temperature fire caulk. Then, completely fireproof "Rock Wool" insulation panels were installed around the chimney so that TruSoft™ cellulose insulation could be blown against the chimney. "Chimney Wrap" was installed because it leaves no gaps in the insulation around the chimney, and seals one of the biggest air leaks in the home. This happy customer will now experience lower air leakage in the home, less heat loss, a more comfortable temperature and moisture level in the home, and lower energy bills. 

Install Airtight, Fireproof Can Light Covers Over Leaky Can Lights in Pittsfield, MA

This Pittsfield, MA homeowner reached out to us because her home was uncomfortable. It was cold inside and she could feel drafts. A problem we discovered when one of our Home Comfort Specialists was conducting her free Home Energy Evaluation, was that her can lights weren't properly insulated. When it comes to making homes more comfortable, stopping air leakage at the top of the house is the #1 priority. Can lights are holes in the ceiling that leak air between the fixture itself, due to the many holes and seams in it. To combat this problem, Fogarty's Home Services installed  TiteShell™ can light covers over the homeowner's can lights. We fitted them around wires and fixture struts, and sealed air tight with expanding foam. TiteShell™ covers are safe from the fire hazards of hot bulbs and fixtures. Once TiteShells™ are installed, the attic is now ready for TruSoft™ insulation to be blown into the attic. Now our happy customer will feel less drafts, a more energy efficient house, a more comfortable temperature in her home, and lower energy costs. We Fix Uncomfortable Homes!

Replacing Basement Windows in Pittsfield, MA

Our Pittsfield, MA customer contacted Fogarty's Home Services with concerns in her basement. One issue was her basement windows. They were leaky, inefficient, and unsightly. We were pleased to offer her a solution that would fix all of those problems, as part of the Total basement Finishing project. Fogarty's Home Services happily removed the old windows and installed Everlast™ High Efficiency Vinyl Window Inserts. With these new windows, our happy customer has a more comfortable temperature in her basement and in the home above. There are less drafts and less air leakage in the home overall. Lastly, she will be saving money every month on her energy bills. "We Fix Uncomfortable Homes!"

Insulating a Basement in Pittsfield, MA

This homeowner in Pittsfield, MA called us regarding concerns he had about the insulation in his home. When our Home Comfort Specialist arrived at the home, he noted that the entire ceiling of the basement was covered in fiberglass batts that were crumbling and falling. 

 

Our solution for this homeowner was simple. We used our two-part expanding spray foam to seal and insulate their rim joist. For this homeowner, the rest of the ceiling was not necessary to insulate so long as the rim joist was properly insulated. Now, the homeowner will have lower energy bills and a more comfortable home as a result! 

Insulating an Attic in Pittsfield, MA

This homeowner in Pittsfield, MA called us when he moved into his home. He was hoping to catch any potential issues with home comfort before they actually became an issue. 

 

When our Home Comfort Specialist arrived at the home, he noted that this homeowner had blown-in fiberglass insulation. Fiberglass is ineffective -- it does not stop air flow. It is both mold food and perfect nesting material for rodents. So, the homeowner wanted it removed. We vacuumed it out and disposed of it. We were then able to completely air seal the attic, and installed baffles in each rafter bay to keep the soffit vents clear. Then, we utilized our TruSoft™ blown in cellulose. TruSoft™ is 85% recycled material that mold doesn't grow on. Pests don't like to nest in it due to the chemicals it is treated with. This new insulation will keep this homeowner's home comfortable for years to come! 

Find Local Dealer
Free Estimate
Top